How To Use The Buttons; Auto Operation - Vivax R+DESIGN ACP-09CH25AERI+ R32 User Manual

ENG
6. Temperature/Timer/Fan speed display
Displays the set temperature by default, or fan speed or timer setting
when using TIMER ON/OFF functions.
Displays the temperature setting (17°C~30°C). When you set the
operating mode to FAN, no temperature setting is displayed. And if in the
TIMER mode, shows the ON and OFF settings of the TIMER.
7. Fan speed display
Displays selected fan speed: Low/ Med/ High or Auto.
NOTE: This fan speed can not be adjusted in AUTO or DRY mode.

How to use the buttons?

Auto operation

Ensure the unit is plugged in and power is available. The OPERATION
indicator on the display panel of the indoor unit starts flashing.
AUTO:
In AUTO mode, the unit will automatically
select the COOL, FAN, or HEAT operation
based on the set temperature.
1. Press the MODE button to select Auto.
2. Press the ▲/▼ button to set the desired
temperature. The temperature can be set
within a range of 17°C~30O°C in 10°C
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can
logically choose the mode of Cooling, Fan,
and Heating by sensing the difference
between the
temperature and the setting temperature
on the remote controller.
2. In the Auto mode, you can not switch the
fan speed.
automatically controlled.
3. If the Auto mode is not comfortable for you,
the desired
manually.
25
-
actual ambient
It has already
mode can be
VIVAX
room
been
selected