Sleep Button Function - Vivax ACP-12CH35AETI-B User Manual

h
TIMER ON OFF
Start
Off
Set
2 hours later
2 hours later
after se tting after setting
!
CAUTION
The timer setting(TIMER ON or TIMER OFF) that in sequence occurs
directly after the set time will be activated first.
If the same time is set for both TIMER ON and TIMER OFF settings, no
timer operation is performed. The air conditioner may stop operating,
either immediately or after approximately 10 minutes.

SLEEP button function

SE T TEMPERAT URE ( C)
AUTO FAN
COOL HIGH
MED
DRY
HEAT LOW
ADJUST
ON/OFF
MODE
FAN SPEED
DIRECT ION
TIMER ON
/ S WI N G
S LEEP 1
CLEAN
TIMER OFF
RE SET LO CK
A I R
FOLLOW
SELF
LED
TURBO
ME
CLEAN DISPLAY
TIMER ON
(Off Start
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
Example:
To start the air conditioner 2 hours after
setting, and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to
display 2.0h on the TIMER ON display.
Stop
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to
display 5.0h on the TIMER OFF display .
5. Wait for the remote control to display
the setting temperature.
When you press the SLEEP button, the
economic running function will be activated.
During Cooling, Heating or AUTO operation,
the set temperature of the air conditioner
will automatically increase or decrease 1 C
per hour for 2 hours. After 2 hours, the set
point will continue at that temperature and
the fan motor will be set to LOW speed.
The sleep mode function can maintain the
most comfortable temperature and save
more energy for you.
NOTE: The SLEEP function is only available
under Cooling, Heating and AUTO
operation.
11
TIMER OFF
Stop operation)
o