Cooling Module Specifications; Raid Management; Fault Tolerance Management; A.4 C Ooling M Odule S Pecifications - Infortrend EonStor S12S-G1033 Installation And Hardware Reference Manual

EonStor S12S-G1033/P Installation and Hardware Reference Manual
A.4

Cooling Module Specifications

Specifications
Max. Rotation RPM
Max. Air Flow (each
module)
Input power
Rated Voltage
Temperature
A.5

RAID Management

Specifications
Configuration
Performance
Monitoring
Remote Control
and Monitoring
Event
Broadcast/Alert
Event Notification
Hardware
Connection
Configuration on
Disk
Failure Indicator
A.6

Fault Tolerance Management

Specifications
Drive S.M.A.R.T Support
A-4
4000
High speed: 31.8CFM;
Low speed: 20.1CFM
9 / 3.12W max.
DC 12V
Operating: -10 to +60ºC
Storage: -20 to +70ºC

Text-based firmware-embedded utility
over RS-232C through the included serial
cable

Telnet via an established network
connection

LCD keypad panel

The SANWatch management suite using
in-band or Ethernet connection
Yes
Yes
Yes, via SANWatch management suite
Yes, via SANWatch management suite
In-band over Fiber, out-of-band via Ethernet
or RS-232C
Configuration data stored on disks so that
logical drive configurations exist after
controller replacement; basic settings, e.g.,
channel mode settings, are stored on
NVRAM.
Faults are indicated via audible alarm, module
LED indicators, LCD panel, SANWatch
management suite, or terminal emulation.
Yes, with user-configurable
detect-only, clone and
replace, and perpetual clone
functions.