Download
Share
Print this page
GAUI X4 Assembly Instruction Manual
  1. Manuals
  2. Brands
  3. GAUI Manuals
  4. Toy
  5. X4 Combo
  6. Assembly instruction manual

GAUI X4 Assembly Instruction Manual

Hide thumbs Also See for X4:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
GAUI
This product is for a radio controlled (RC) helicopter.
Improper operation, maintenance or assembly can potentially cause a RC helicopter to
pose danger to persons or objects including but not limited to the
possibility of causing serious physical injury and even death.
本產品是無線遙控的直升機。
不當的操作，保養或是組裝有可能導致遙控直升機對於人身或是物品造成危險。
Recommendation:
We highly suggest using the latest version of the Assembly Instruction Manual.
To download the latest version, please visit the Offi cial TSH GAUI web site:
www.gaui.com.tw
取得最新的手冊：
我們非常建議您取得最新版本的手冊。
請到泰世網站下載最新的手冊，並且取代目前的手冊。
ASSEMBLY INSTRUCTION
This product is suitable servo specifi cations
(35mm x 15mm x 30mm).
Cited the following servo for reference purposes only.
本產品伺服器適用規格(35mm x 15mm x 30mm)。
列舉下列伺服機，僅供參考。
CCPM: FUTABA: BLS153.BLS651.S9650
JR
: DS3401.DS3405.DS3201.DS361.NES-3125
SAVOX : SH1350
RUDD: FUTABA: BLS257.S9257.
SAVOX : SH1357.
V1.0.3

Advertisement

loading
Need help?

Need help?

Do you have a question about the X4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GAUI X4

Summary of Contents for GAUI X4

  • Page 1 Recommendation: 本產品伺服器適用規格(35mm x 15mm x 30mm)。 We highly suggest using the latest version of the Assembly Instruction Manual. 列舉下列伺服機，僅供參考。 To download the latest version, please visit the Offi cial TSH GAUI web site: CCPM: FUTABA: BLS153.BLS651.S9650 www.gaui.com.tw : DS3401.DS3405.DS3201.DS361.NES-3125 取得最新的手冊：...
  • Page 2 Preface 前言 LIABILTY DISCLAIMER 免責聲明 Academy of Model Aeronautics (AMA) Tools and Equipment for Assembly 自備工具及設備 Symbols of Assembly Notices / Specification 組裝代號說明 Fuselage Assembly-1~2 機身組立-1~2 Fuselage Assembly-3~4 機身組立-3~4 Fuselage Assembly-5 / Motor Installation-1 機身組立-5 / 馬達組立-1 Motor Installation-2 / Main Drive Gear Assembly 馬達組立-2 / 主齒盤組立...

  • Page 3: Safety Precautions

    GAUI Preface TAI SHIH HOBBY CORPORATION 前言 Thank you for purchasing GAUI High Performance RC Helicopter from Tai Shih Hobby Corporation (TSH). We hope you will enjoy the joy of flight. GAUI 感謝您購買泰世科技出品的 高性能遙控直升機，我們希望您可以盡情享受 飛行的樂趣。 In order to understand full assembly sequences, this instruction manual show the assembly information of this model, even though some elements are supplied as pre-assembled.
  • Page 4 GAUI LIABILITY DISCLAIMER TAI SHIH HOBBY CORPORATION 免責聲明 LIABILITY DISCLAIMER This product is for a radio controlled (RC) helicopter. Improper operation, maintenance or assembly can potentially cause a RC helicopter to pose a danger to persons or objects including but not limited to the possibility of causing serious physical injury and even death.

  • Page 5: Radio Control

    GAUI Academy of Model Aeronautics (AMA) TAI SHIH HOBBY CORPORATION For United States market, The Academy of Model Aeronautics (AMA) is a national organization representing modelers in the United States. Please refer the National Model Aircraft safety code from Academy of Model Aeronautics.
  • Page 6 GAUI Tools and Equipment for Assembly 自備工具及設備 TAI SHIH HOBBY CORPORATION 2.0mm Hexagon Screw Driver 3.0mm Hexagon Screw Driver 2.5mm Hexagon Screw Driver 3.5mm Hexagon Screw Driver 2.0mm 六角螺絲起子 3.0mm 六角螺絲起子 2.5mm 六角螺絲起子 3.5mm 六角螺絲起子 Needle-nosed pliers Diagonal cutting plier...
  • Page 7 GAUI Symbols of Assembly Notices TAI SHIH HOBBY CORPORATION 組裝代號說明 Attention: Pay attention, care should be taken Apply general thread lock. Apply anaerobic adhesive. during assembly. To tight screw and apply thread lock. Tighten screw and apply thread lock. 注...
  • Page 8 GAUI Fuselage Assembly-1 TAI SHIH HOBBY CORPORATION 機身組立-1 B8x16x5 Assemble the one way gear and shaft, then tighten the M3x3 set screws onto the one way shaft. 組合單向齒軸及單向齒，之後 M3x3 再將M3x3鎖附於單向齒軸上。 M3x5 P8.1x9.6x5.3 M2x8 B8x12x3.5 W8x10.5x0.5 One Way Gear(19T) 單向齒 W8x10.5x0.5 B8x12x3.5...
  • Page 9 GAUI Fuselage Assembly-3 TAI SHIH HOBBY CORPORATION 機身組立-3 1.Install the Reduction Gear Unit to the Frames , assemble other parts as shown in figure. M3x4 2.Do not tighten those M3x18 screws until the tail M3x12 boom is installed and the gear mesh is set properly.
  • Page 10 GAUI Fuselage Assembly-5 TAI SHIH HOBBY CORPORATION 機身組立-5 1.Assemble the landing skid and skid pipe to the main frame. 1.將腳架及滑橇組裝至機身。 M3x3 4pcs M3x14 2pcs GAUI Motor Installation-1 TAI SHIH HOBBY CORPORATION 馬達組立-1 1. Fix the motor to the motor mount with M3x6 screws (not tighten yet).
  • Page 11 GAUI Motor Installation-2 TAI SHIH HOBBY CORPORATION 馬達組立-2 1. Adjust the gear mesh of the motor pinion and front drive gear to approximately 0.1mm. 2.Fix the motor set with M3x6 screws. 1.調整馬達齒與前齒輪間隙 (約0.1mm)。 2.取出馬達座總承將P8. M3x6螺絲鎖緊，固定馬達。 3.將馬達總成置入機身並使用 M3x6螺絲固定。 M3x6 4pcs GAUI...
  • Page 12 GAUI Servos Assembly-1 TAI SHIH HOBBY CORPORATION 伺服機安裝-1 1. Assemble the servos spare M3x8 6pcs parts, make sure the mounting blocks are assembled correctly. 2.Install the servos to the M2x12 2pcs frame, fixing with M3x6, M3x14 screws. 伺服器鋁柱 Mounting block 1.組裝伺服器並確認伺服器...
  • Page 13 GAUI Rotor Head Assembly TAI SHIH HOBBY CORPORATION 主旋翼頭組裝 1. Assemble the main rotor The default setting of damper Idle: 95° Damper rubber head, fixing the M3x16 screw. rubber is 75°, and 95° Normal: 75° Damper rubber damper rubber (#213220) for 1.組裝主旋翼頭並鎖緊M3x16。...
  • Page 14 GAUI Rotor Blade Grip Assembly TAI SHIH HOBBY CORPORATION 旋翼夾頭組裝 1.Assemble the rotor blade grip. 2.Fix the main grip levers with M3x16 screws. 3.Install the stop plate. 1.將主旋翼夾頭組裝至主旋翼頭 2.鎖上主旋翼舵柄。 M3x10 3.鎖上煞車盤。 Apply thread lock on all screws in this section.
  • Page 15 GAUI Assembly of Tail Gear Box TAI SHIH HOBBY CORPORATION 尾殼總成組裝 1.Fix the M2x8 screw into the bevel gear, and fix the M2x8 screw with M3x3 screw. 1.將M2x8螺絲鎖入齒軸並將 M3x3螺絲鎖入尾軸，固定M2x8。 B12x18x4 M3x6 Apply thread lock on all screws in this section.
  • Page 16 GAUI Assembly of Tail Blade Grip TAI SHIH HOBBY CORPORATION 尾旋翼夾頭組裝 B4x9x4 T3x8x3.5 W3.1x4.6x0.6 N2.5x5L B3x8x3 GAUI Assemblly of Tail Rotor Set TAI SHIH HOBBY CORPORATION 尾旋翼總成組裝 1.Assemble the tail rotor set. 2.Please make sure the tail blade grip work smoothly while fixing the M2x10 screws.
  • Page 17 GAUI Assembly of Tail Blades TAI SHIH HOBBY CORPORATION 尾旋翼片組裝 N3x5.5L M3x14 GAUI Assembly of Tail Boom Set TAI SHIH HOBBY CORPORATION 尾管總成組立 1.Insert the tail boom, make sure the gear mesh is approximately 0.1mm. 2. Fix M3x18 screws in P.7.
  • Page 18 GAUI Tail Boom Brace Assembly TAI SHIH HOBBY CORPORATION 支撐桿組裝 1. Assemble the tail boom brace. 1.將支撐桿鎖上機身。 P3x6x4 M3x6 Ø M3x14 GAUI Main Rotor Linkage Rod Assembly TAI SHIH HOBBY CORPORATION 主旋翼拉桿組裝 41.6mm 49.5mm 1.Assemble the linkage rod (A) x 3 2.Assemble the linkage rod...
  • Page 19 GAUI Throttle Curve and Pitch Curve 螺距&油門曲線設定 TAI SHIH HOBBY CORPORATION Normal Flight Freestyle/Aggresive 一般飛行模式 特技1模式 100% 100% 92.5% 92.5% Throttle Curve 油門曲線 Point-L Point-1 Point-2 Point-3 Point-4 Point-5 Point-H Point-L Point-1 Point-2 Point-3 Point-4 Point-5 Point-H Normal Flight Freestyle/Aggressive 一般飛行模式...
  • Page 20 213665 X4 Tail Rotor Blade Set(70mm) X4 尾旋翼(70mm) 213667 X4 CNC Tail Support Clamp(Silver anodized) X4 CNC 水平翼固定座(電鍍亮銀) 213200 X4 FES CNC Main Rotor Yoke Set (Black anodized) X4 FES CNC 主旋翼頭(電鍍黑) 213212 Ball with Stand(4.8mm) 4.8球頭 213211 Mast Collar Set 主軸輪擋...
  • Page 21 213662 Tail Pitch Control Lever Set 尾舵角片 213663 Tail Support Clamp 尾管夾 213664 Rudder Control Guide 拉桿座 213666 X4 CNC Torque Tube with bearing (for 425L blades) X4 CNC尾傳動軸桿組(適用425mm槳) 803726 B. Pack(3x8x3)x4 軸承(3x8x3)x4 803727 B. Pack(4x9x4)x2 軸承(4x9x4)x2 803728 B. Pack(3x6x2.5)x4 軸承(3x6x2.5)x4...
  • Page 22 GAUI http://www.gaui.com.tw E-mail: gaui@gaui.com.tw FAX: +886-2-2610-5567 MADE IN TAIWAN...