Table of Contents
Advertisement
Application
EFET 160 is an electronic thermostat designed for regulating heat and
cold from -10˚C to +50˚C .
EFET 160 is moisture proof (IP 44) so it can be used in moist rooms
and outdoors .
EFET 160 has a built-in 2-pole switch, so an external switch is not
necessary .
EFET 160 is supplied with a NTC sensor of 2 .5 m cable . The sensing cable
can be extended up to 50 m with 1 .5 mm² installation cable without
affecting the accuracy of the thermostat . However, the cable must not
be placed parallel to high voltage cables as undesirable signals may be
induced . The installation must be permanent . The thermostat must be
connected by an authorized electrician .
2
VIFZK102
02/2007
Advertisement
Table of Contents
