Table of Contents
Advertisement
Accessories for EFET 160:
-
fittings for mounting on pipes,
-
outdoor sensor for use with the thermostat .
Mounting the outdoor sensor:
1 . Knock pellets out of the thermostat and sensor .
2 . Mount the black connection nipple in the sensor hole . Then twist the
connection nipple into the thermostat hole . Turn the outdoor sensor
until the three small locks click .
3 . Connect the NTC sensor to the NTC input with a soft mounting cable,
e .g . Ø 0 .25 mm
4 . Fasten the outdoor sensor and thermostat seperately with screws or
clips .
4
.
2
VIFZK102
02/2007
Advertisement
Table of Contents
Need help?
Do you have a question about the EFET 160 and is the answer not in the manual?