Table of Contents
Advertisement
Quick Links
Packing Check list
Package 1
Package 2
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved!Children
shall not play with the appliance!
Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended normal operation position and
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in,regulate and clean the
appliance or perform user maintenance.
IMPORTANT INSTRUCTIONS
BFM EUROPE LTD
Wall Hung Electric Fires
Model No. FFHOW0RE2
1 off
Electric fire
1 off
Remote control handset
2 off
AAA batteries
1 off
Instructions manual
1 off
Fascia
IMPORTANT
"Onyx" MK2
Page 1
Advertisement
Table of Contents
Related Manuals for Flavel Onyx MK2 FFHOW0RE2
Summary of Contents for Flavel Onyx MK2 FFHOW0RE2
- Page 1 “Onyx” MK2 Wall Hung Electric Fires Model No. FFHOW0RE2 Packing Check list Package 1 1 off Electric fire 1 off Remote control handset 2 off AAA batteries 1 off Instructions manual Package 2 1 off Fascia IMPORTANT This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved!Children shall not play with the appliance!
-
Page 2: Important Instructions
WALL-MOUNTED ELECTRIC FIREPLACE/HEATER PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION AND/OR USE OF THIS ELECTRIC FIRE AND RETAIN FOR FUTURE REFERENCE. WHEN USING ELECTRICAL APPLIANCE, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING IMPORTANT SAFETY ADVICE. -
Page 3: Installation Preparation
WALL-MOUNTED ELECTRIC FIREPLACE/HEATER DO NOT cover the heater. The meaning of figure is “WARNING! DO NOT COVER”. This is to avoid over-heating of the product. DO NOT leave the heater unattended while it is in use. Always turn the appliance to the OFF position and unplug it from the electrical outlet when not in use. -
Page 4: Specifications
WALL-MOUNTED ELECTRIC FIREPLACE/HEATER SPECIFICATIONS Voltage…………………………………230 V AC, 50Hz Total Watts……………………………2X900Watts Dimension……………………………..1000mm x 100mm x 470mm STRUCTURE AND PARTS 1. Screen 2. Manual Keypad 3. ON/OFF Switch 4. Power Inlet 5. Air Outlet TOOLS REQUIRED INSTALLATION PREPARATION INSTALLATION PREPARATION BFM EUROPE LTD Page 4... -
Page 5: Clearance To Combustibles
WALL-MOUNTED ELECTRIC FIREPLACE/HEATER WANING! DO NOT USE THIS APPLIANCE IF ANY PART HAS BEEN UNDER WATER. IMMEDIATELY CALL A QUALIFIED SERVICE TECHNICIAN TO INSPECT AND TO REPLACE ANY PART OF THE ELECTRICAL SYSTEM IF NECESSARY. · Open the packaging carefully and remove the foam. ·... - Page 6 WALL-MOUNTED ELECTRIC FIREPLACE/HEATER Figure 1 Step 2: Choose a solid and plain wall. Position the mounting bracket where the appliance is to be installed on the wall and ensure that the bracket is level. Using a pen mark the 4 holes through the 4 holes on the mounting bracket as shown below (Figure 2) Step 3: Take away the mounting bracket and then drill four 8mm diameter holes on the wall.
- Page 7 WALL-MOUNTED ELECTRIC FIREPLACE/HEATER Step 5: Hang the appliance on the hooks at the bottom of the bracket and push the top of the appliance into the mounting bracket. Now fix the appliance to the mounting bracket by refitting the two M4×8 screws which were removed in step 1(Figure 5).
- Page 8 WALL-MOUNTED ELECTRIC FIREPLACE/HEATER ELECTRICAL SPECIFICATIONS Voltage: 230 V AC, 50 Hz Total Watts: 2X900 Watts Dimensions 1: 1000 mm x 100mm x 470mm • The Fireplace/Heater Unit On the top right side plate of the fireplace/heater unit is the control panel. This panel contains the buttons to properly operate the fireplace/heater unit.
- Page 9 WALL-MOUNTED ELECTRIC FIREPLACE/HEATER OPERATING INSTRUCTIONS The upper segment of the control panel, (1), is the Main Power button. As the name infers, the Main Power button controls the overall power to the fireplace/heater unit. Pressing the button once turns power on to the entire unit, and pressing the button again will turn power off to the entire unit.
- Page 10 WALL-MOUNTED ELECTRIC FIREPLACE/HEATER OPERATING INSTRUCTIONS 1. Turn the remote control over, and locate the battery cover. Battery Cover 2. Remove the battery cover by sliding it towards the bottom end of the remote control. 3. Insert two AAA batteries into the battery socket,the battery has two poles(positive and negative),the flat side is negative pole,the other is positive pole.make sure the batteries are firmly seated into the remote control.
- Page 11 WALL-MOUNTED ELECTRIC FIREPLACE/HEATER OPERATING INSTRUCTIONS Remote Control Button Functions • The remote control mimics the buttons on the front panel of the fireplace/heater. The remote control does not have a display function. The buttons on the remote control work as follows: Main Power Flames Control L_heat Control...
-
Page 12: Maintenance Instructions
WALL-MOUNTED ELECTRIC FIREPLACE/HEATER MAINTENANCE INSTRUCTIONS · Always remove the plug from the socket-outlet and allow the heater to cool down before cleaning it. · Wipe the exterior surface of the appliance occasionally with a soft damp cloth (not dripping wet) and dry the exterior surface before operating the heater.