Riso ComColor 9150 User Manual page 52

Chapter 2 Maintenance
<Y00-000>Consumable Errors
These error messages are displayed when it is time to replace consumables or parts that require periodical replace-
ment.
Water is in short supply.
Refill the Water Supply Tank
with water.
<Z00-000>Check Settings Errors
This error message is displayed when a cover is not completely closed.
Close the mail maker cover.
<W000-000> Warning
These warning messages are displayed when there is no more paper, the mail stacker is full, a peripheral device is
not connected, or there is another problem.
Job name:
This printing job is not acceptable
because mail maker is
unavailable. Printing without using
the mail maker is possible.
(The job has been deleted).
Job name:
Printing is not possible because
this job has inexecutable original.
Please check the original.
(Job has been deleted.)
The mail stacker is full.
Remove mails.
Insert No.
This job cannot be done due to the
maximum number of inserts exceeded.
Check the data.
(The job has been deleted.)
Insert No.
Insert data with a size
different from the specified size
has been found. Check the settings.
(The job has been deleted.)
2-6
Message
Message
Message
Action to Take
The water in the water supply tank is in short supply.
Refill the water supply tank with water. See "Refilling the Water
Supply Tank" (p. 2-2) for details.
Action to Take
The front cover is not completely closed. Securely close it.
Action to Take
Turn off the power of the mail maker and then on again.
See "Turning the Power ON/OFF" (p. 22) for details on
turning the power on.
If the recovery operations above does not help solve your
error, contact your dealer (or authorized service representative).
Press [Close] to continue using the printing functions
other than for mail making.
Data formulation of the first mail was not correct.
For details about data formulation, see "Original data structure
of "mails"" (p. 18) for details.
➀ Press [Close].
➁ The continue confirmation screen is displayed. Press [Close].
➂ Correct or clear the incorrect part of original data and resend
the data.
➀ The mails stacked in the mail stacker is exceeding the
maximum number of mails. Remove the mails.
➁ If the print is not finished, press the [START] key to continue
the printing.
The mail is exceeding the maximum number of inserts. Press
[Close].
For details about the number of inserts, see "Maximum inserts"
(p. 1-7) for details.
In [Details] of the mail making, if a check mark is not placed in
[Insert], you cannot print if the inserts data is contained.
Correct or clear the incorrect part of original data and resend the
data.
Different size data is mixed among a job.
Press [Close].
Correct or clear the incorrect part of original data, and resend
the data.
Wrapping Envelope Finisher User's Guide 05