Load the envelope form.
3
■ Simplex printing of inserts
Set the envelope form facing up, with the flap is
on the right side (pick-up roller side) of the
standard tray.
Flap to the right
side, front side up
■ Duplex printing of inserts
Set the envelope form facing down, with the
flap is on the left side of the standard tray.
Flap to the left
side, back side up
Preparation for Mail Making (Printer)
Move the guides against the edges
4
of the envelope form, and push the
lever to lock.
Slide the guides so that they fit the width of the
envelope form, and lock the paper feed guide
levers to fix the guide in place.
Set the paper feed pressure
5
adjustment lever.
On the operation panel, change
6
the feed tray settings.
Select the tray to which the envelope forms are
loaded from [Feed tray] to change the tray
settings (paper size and type). For details, refer to
the printer's instruction guide.
Set the following items for the tray to which the
envelope forms are loaded.
• [Paper size]
Set the paper size of the envelope forms
loaded to the tray.
• [Paper type]
IJ paper
• [Feed ctrl.]
Standard
Wrapping Envelope Finisher User's Guide 05
25