Riso ComColor 9150 User Manual page 36

Chapter 1 Functions for Mail Making
Make a sample mail
In order to check the output of the mail, you can
make a sample mail of a single copy. Place a check
mark when you want to perform a sample mail.
Check the following points when printing a sample
mail.
• The glue is adequately adhering.
• The page sequence of the inserts is the same as
indicated in the application.
• The address, stamp position of the sender, and
orientation are correct.
• The stamp quality is acceptable (there is no
smudging, thin spots, or erased characters).
● Before the first printing run, we recommend
that you make a sample mail.
● For a sample mail, the word "SAMPLE" is
printed in the center of the envelope form and
the inserts.
XXXX XXXX
XXXX XXXXXX
XXXX XX99999
Envelope Form
● We recommend that the telecommunications
protocol is established to send from an
available RAW port that transfers data
efficiently when making the sample mail.
Check the current printer settings in the [Port]
tab in the properties screen of the printer.
About the Orientation of the Inserts
The orientation of the image when the inserts are outputted to the Mail maker becomes either of the following
depending on the settings of [180° rotation of the inserts]. The orintation of the image are all shared by the folding
method.
Duplex print
(inserts)
Long edge
Short edge
1-4
Address
XXXX XXXX
side
XXXX XXXXXX
XXXX XX99999
Inserts Paper
Original Data for Inserts
A
ABC
180° Rotation [OFF]
Transfer Direction
Ejected Image Orientation
180° Rotation [ON]
Transfer Direction
Wrapping Envelope Finisher User's Guide 05