Riso ComColor 9150 User Manual page 35

Duplex print (envelope form)
[OFF]
Simplex print.
[Long edge]
Duplex print with the long-edge as the binding side.
[Short edge]
Duplex print with the short-edge as the binding side.
● You cannot set to simplex/duplex for each mail.
● When using dedicated paper from our
company, ensure that you set to [OFF] (do not
set to duplex).
■ Inserts Settings
Insert
Select this checkbox when creating the mail with
inserts. After selecting, you can select the following
items.
Size of inserts
Select the size of the originals to be inserted.
You cannot insert originals with different sizes when
making a mail. Check that the originals are the
same size.
Inserts tray
Select the tray with the paper to print the inserts.
You cannot use the same tray as the envelope
forms.
[Auto]
The paper tray is selected automatically from the
settings of the paper type and insert size.
[Feed tray1-3]
Select the designated tray that you want to use.
[Standard tray/High capacity feeder]
Select when you use the standard tray (or the high
capacity feeder if connected).
When [Auto] has been selected but the paper
matching the [Size of inserts] setting has not been
loaded (or the setting has been completed, but
[Manual] is selected in [Tray selection]), an error
occurs and the job is not printed.
Inserts type
Select the type of paper.
Before printing, adjust the ink quantity to match the
selected paper type and perform image processing.
[Any]
Select the tray depending on the [Size of inserts]
settings. Set the paper type of the corresponding tray
or the [Default paper type of "Any"] setting on the
[Environment] tab.
[Plain]
[IJ paper]/[Matt coated]
Select one of these when using IJ Paper or similar
paper.
[High-quality]
[Card-IJ]
Duplex print (inserts)
Set the print surface.
[OFF]
Simplex print.
[Long edge]
1
3
2
2
4
1 4
3
Duplex print with the long-edge as the binding side.
[Short edge]
1
3
2
2
1
4
4
3
Duplex print with the short-edge as the binding side.
Rotate inserts 180 degrees
The paper feed direction of the envelope form is
already determined. You can rotate original data
and change the orientation of the print to align with
the orientation of the inserts and print. When
rotating the inserts 180° to print, select the
checkbox. The surface that the person views when
opening the insert is the printed document (first
page).
Wrapping Envelope Finisher User's Guide 05
Setting the Printer Driver
1
1-3