Riso ComColor 9150 User Manual page 26

Move the guides against edges of
5
the envelope form and push the
lever to lock.
Slide the guides so that they fit the width of the
envelope form, and press the "lock" of the locking
lever to fix the guide in place.
6 Move the stopper against the edge
of the envelope form.
Be sure to move the stopper against the edge of
the paper. The unit determines the size of the
envelope form based on the stopper position.
7 Push the tray back into the unit.
8 On the operation panel, change
the feed tray settings.
Select the tray to which the envelope forms are
loaded from [Feed tray] to change the tray
settings (paper size and type). For details, refer to
the printer's instruction guide.
24
Set the following items for the tray to which the
envelope forms are loaded.
• [Paper size]
Set the paper size of the envelope forms
loaded to the tray.
• [Paper type]
IJ paper
• [Feed ctrl.]
Standard
In the Standard Tray
1 Open the standard tray until it
stops.
Spread the guides.
2
Set the paper feed guide levers (in two positions
on both sides) to unlock the guides and slide the
guides.
Wrapping Envelope Finisher User's Guide 05