Envelope Form Layout; Insert Layout - Riso ComColor 9150 User Manual

About the layout

Envelope Form Layout

The layout of the envelope form surface is created
based on the address reading direction in the mail
creation application in use. Also, the area of the
envelope form which can be printed on is limited.
Before creating mails, for example, make a proof
copy and align it with the envelope form to check the
orientation and print position.
XXXX XXXX
XXXX XXXXXX
XXXX XX99999
XXXX XXXX
XXXX XXXXXX
XXXX XX99999
Printable area
Creates vertical originals.
When folding the envelope form into the envelope
form, lay it out so that the back is up, and the
remoistening glue part is down. On the back side, the
characters are read in reverse.

Insert Layout

Some areas around the edges of the paper cannot be
printed regardless of the data size of the original. The
size of the blank margin left by the edges of the paper
(where printing is not possible) varies depending on
the model.
The margin is from 1mm (0.04") to 3mm (1/8").
For details, see the printer's instruction guide.
Printable area
Wrapping Envelope Finisher User's Guide 05
Mail Making
margin
margin
29