Changing Finished Job And Folder Job Settings - Riso ComColor 9150 User Manual

Chapter 1 Functions for Mail Making
Change the settings during
printing
Press the [STOP] key.
1
The [Confirm] screen is displayed.
• To cancel printing and delete the job, press
[Cancel].
• To continue printing, press [Continue].
2 Press the [Setting chg.].
The [Suspending] screen is displayed.
On the [Basic] tab in the [Suspending] screen, you
can change the following settings.
• [Image position]
• [Inserts tray]
You can select the feed tray for the inserts or
set the paper size and type.
• [Envelope form tray]
You can select the feed tray for the envelope
form or set the paper size and type.
• [Print density]
1-6
● When setting the [Image position], be careful
not to set the glue area of the envelope form
over the image. This will cause poor adhesion
of the glue.
● The [Inserts tray] and the [Envelopes form
tray] cannot be designated as the same tray.
● The settings of the [Inserts tray] and
[Envelopes form tray] can be used only on the
[Suspending] screen.
The settings cannot be changed from [Details]
on the [Finished job] or [Folder job] screen.
● To confirm the settings, press [Settings].
For the setting items and method, see the
printer's instruction guide.
● When you press the [STOP] key and suspend
the printer, the [Sample mail making]
information on the [Functions] screen is
displayed. For details, see "Sample mail
making" (p. 1-8).
Change the setting if required, and
3
press [Print].
Printing the configured job begins.
Changing Finished Job and
Folder Job Settings
1 Display the job list.
Press the screen selection button of the job list to
be displayed.
Select the job with the settings to
2
change.
To cancel the selection, press again.
Wrapping Envelope Finisher User's Guide 05