Table of Contents
Advertisement
Banner Sheet (Start Sheet)
This command turns on/off the banner sheet that prints at the beginning of every job. It only applies to the job that
contains the command; it does not affect any other jobs. If the device is configured to disable banner sheets, this
command is ignored.
PJL COMMENT Command
@PJL COMMENT OID_ATT_START_SHEET
OID_VAL_JOB_SHEET_"string";
Where string is:
NONE
Do not create a banner sheet for this job.
FULL
Create a banner sheet for this job. By default, if the START SHEET comment is not included a
banner sheet is generated unless the device has banner sheet disabled.
USER
A custom start sheet is included in this job.
Media Commands
Media Source
This command specifies the tray to supply the job's media. These are PCL commands rather than PJL commands.
Insert this command within the PCL portion of the print job.
PS Cmd
PCL5 Cmd
PCL XL/6
PS Cmd
automatic
tray-1
tray-2
tray-3
tray-4
tray-5
tray-6
dc10cc0470
Customer Support
DSC Command
%%OID_ATT_START_SHEET
OID_VAL_JOB_SHEET_"string";
featurebegin{
%%BeginFeature: *InputSlot string
<< (string) xerox$MediaInputTray >> setpagedevice
}featurecleanup
where string is from the table below.
<Esc>&l#H
where # is the number assigned to the selection.
ubyte ## attr_ubyte MediaSource
Tray 1 example: 0xc0 0x04 0xf8 0x26
where ## is the hex number assigned to each selection.
PCL5
<Esc>&l7H
<Esc>&l4H
<Esc>&l1H
<Esc>&l5H
<Esc>&l8H
<Esc>&l21H
<Esc>&l22H
PCL XL/6
0x01
0x04
0x05
0x07
0x08
0x0A
0x09
Page 8
Advertisement
Table of Contents
