Automatic Steering - Simrad GO XSE Operator's Manual

Automatic steering

Note:
Ú Not available for NAC-1 autopilot computers.
This option displays an overview of all autopilot steering
parameters, and you can adjust parameters if required.
For more details, refer to the separate GO XSE Installation manual.
Installation
Note:
Ú Not available for NAC-1 autopilot computers.
Used for autopilot installation and commissioning. See the separate
GO XSE Installation manual.
Commissioning
Note:
Ú
Only available for NAC-1 autopilot computers.
Used for commissioning the rudder or virtual rudder feedback.
Steering response
Note:
Ú Only available for NAC-1 autopilot computers.
Used to increase or decrease the steering sensitivity. A low response
level reduces the rudder activity and provides a more loose steering.
A high response level increases the rudder activity and provides
more tight steering. Too high a response level will cause the boat to
make "S" movements.
Autopilot | GO XSE Operator Manual
89