Selecting Pages And Panels; Creating A Man Overboard Waypoint - Simrad GO XSE Operator's Manual

22
• Adjust a slide bar value by either:
- dragging the slide bar
- selecting the + or - icons
Select the Back menu option to return to the previous menu level,
and then exit.
You can make the menu slide away by tapping the screen outside
the menu area, or by pressing the MENU button. When you re-
press the MENU button, the menu opens in the same status it had
before it closed.
The status of the cursor (active vs. inactive) changes the menu
options.
Dialog boxes
Numeric and alphanumeric keyboards are automatically displayed
when required for entering user information in dialogs.
A dialog is closed by saving or cancelling the entry.
A dialog can also be closed by selecting the X in the dialog's upper
right corner.

Selecting pages and panels

Selecting a page
• Select a full page panel by selecting the relevant application
button on the Home page
• Select a favorite page by selecting the relevant favorite button
• Select a predefined split panel by pressing and holding the
relevant application icon
Select active panel
In a multiple panel page, only one panel can be active at a time. The
active panel is outlined with a border.
You can only access the page menu of an active panel.
You activate a panel by tapping it.

Creating a Man Overboard waypoint

If an emergency situation should occur, you can create a Man
Overboard (MOB) waypoint at the vessel's current position by
selecting the MOB button on the Home page.
Basic operation | GO XSE Operator Manual