Integration Of 3 Rd Party Devices - Simrad GO XSE Operator's Manual

rd
Integration of 3 party devices
rd
Several 3 party devices can be connected to the GO XSE. The
applications are displayed on separate panels or integrated with
other panels.
A device connected to the NMEA 2000 network should
automatically be identified by the system. If not, enable the feature
from the advanced option in the System settings dialog.
rd
The 3 party device is operated by using menus and dialogs as on
other panels.
This manual does not include specific operation instructions for any
rd
3 party device. For features and functionality, refer to the
rd
documentation included with the 3 party device.
SmartCraft VesselView integration
SmartCraft data can be displayed and interaction are enabled
through the GO XSE when a VesselView 7 or VesselView 4 gateway
device is present on the network.
The engine supplier icon appears on the Home page when a
device is available.
FUSION-Link integration
FUSION-Link devices connected to the NMEA 2000 network can be
controlled from the GO XSE system.
The FUSION-Link devices appear as additional sources when using
the audio function. No additional icons are available.
Refer to "Audio" on page 132 for more information.
BEP CZone integration
The GO XSE integrates with BEP's CZone system used for controlling
and monitoring a distributed power system on your vessel.
The CZone icon is available in the Tools panel on the Home page
when a CZone system is available on the network.
A separate manual is provided with your CZone system. Refer to this
documentation and to the GO XSE Installation manual for how to
install and configure the CZone system.
18
Introduction | GO XSE Operator Manual