Checking The Engine-Oil Level - Toro Titan MX4800 Operator's Manual

Using the Fuel Gauge
Use the fuel window below the operator to verify the level of
gasoline before filling the tank
1
1. Fuel gauge window
Filling the Fuel Tank
Make sure the engine is shut off and the motion controls are
in the park position.
Important: Do not overfill fuel tank. Fill the fuel tank
to the bottom of the filler neck. The empty space in the
tank allows the fuel to expand. Overfilling may result in
fuel leakage or damage to the engine or emission system.
1. Clean around the fuel tank cap and remove the cap.
Note: You can use the fuel window below the
operating position verify the presence of gasoline
before filling the tank
2. Slowly add regular, unleaded gasoline until the fuel
reaches the base of the filler neck
(Figure 6).
1
G020318
Figure 6
(Figure 6).
Figure 7.
A
C
D
3. Install the fuel tank cap securely and tighten until it
"clicks." Wipe up any gasoline that may have spilled.

Checking the Engine-Oil Level

Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to
Engine-Oil Level (page
16
B
g027637
Figure 7
Checking the
31).