Servicing The Spark Plug - Toro Titan MX4800 Operator's Manual

A
C
E

Servicing the Spark Plug

Service Interval: Every 500 hours—Replace the spark
plug(s).
The spark plug is RFI compliant. Equivalent alternate brand
plugs can also be used.
Type: Champion XC12YC (or equivalent)
Air Gap: 0.76 mm (0.03 inch)
Removing the Spark Plug
1. Disengage the blade-control switch, move the motion
controls outward to the park position, stop the engine,
and remove the key.
2. Before removing the spark plug(s), clean the area
around the base of the plug to keep dirt and debris out
of the engine.
3. Remove the spark plug
B
D
g027517
Figure 39
(Figure 40).
A
g027478
Checking the Spark Plug
Important: Do not clean the spark plug(s). Always
replace the spark plug(s) when it has: a black coating,
worn electrodes, an oily film, or cracks.
Note: If you see light brown or gray on the insulator, the
engine is operating properly. A black coating on the insulator
usually means the air cleaner is dirty.
Set the gap to 0.76 mm (0.030 inch).
A
33
B
Figure 40
B
g027479
Figure 41