Premaintenance Procedures; Raising The Seat; Lubrication; Greasing The Bearings - Toro Titan MX4800 Operator's Manual

1. Read the Operator's Manual for information on maintenance.
2. Check the engine oil every 8 hours.
3. Check the drive wheel tire pressure every 25 hours.
Premaintenance
Procedures

Raising the Seat

Make sure that the motion-control levers are the neutral-lock
position and parking brake is set. Lift and hold the lever
behind the seat forward to disengage the seat latch and then
lift the seat forward.
The following components can be accessed by raising the seat:
•
Service decal
•
Fuses
•
Battery and cables
Figure 31
4. Check the hydraulic oil every 25 hours.
5. Check the caster wheel tire pressure every 25 hours.
6. Lubricate the caster wheel every 25 hours.

Lubrication

Greasing the Bearings

Service Interval: Every 25 hours—Grease all lubrication
Grease Type: No. 2 general-purpose, lithium-based grease
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Move the motion-control levers outward to the neutral
position, set the parking brake, stop the engine, remove
the key, and wait for all moving parts to stop before
leaving the operating position.
3. Clean the grease fittings
a rag. Make sure to scrape any paint off of the front
of the fitting(s).
29
points.
(Figure 31 and Figure 32) with