Konica Minolta bizhub 554e Quick Start Manual page 40

2.2 About this machine
No. Name
1 Main unit
2
Fax Kit FK-511
3 Authentication Unit AU-
102 (Biometric Type)
4
Authentication Unit AU-
201 (IC Card Type)
5 Working Table WT-506
6
Keypad KP-101
7 Keyboard Holder KH-102
8
Security Kit SC-508
9 Fax Mount Kit MK-728
10
FAX Kit FK-508
11 Mount Kit MK-730
12
Large Capacity Unit LU-
301
13 Large Capacity Unit LU-
204
14
Desk DK-510
15 Paper Feed Cabinet PC-
410
16
Paper Feed Cabinet PC-
210
17 Paper Feed Cabinet PC-
110
18
Desk DK-705
19 Saddle Stitcher SD-511
20
Finisher FS-534
21 Punch Kit PK-520
22
Saddle Stitcher SD-512
23 Finisher FS-535
24
Punch Kit PK-521
25 Z Folding Unit ZU-606
26
Job Separator JS-602
27 Post Inserter PI-505
28
Output Tray OT-506
29 Finisher FS-533
30
Punch Kit PK-519
31 Job Separator JS-506
bizhub 554e/454e/364e/284e/224e
Description
Scans the original in the scanner section, and prints a scanned im-
age in the printer section.
Required to use the fax function.
Working Table WT-506 is required as a stand.
Working Table WT-506 is required as a stand.
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit is installed.
It is equipped on the side of the Control Panel. Allows you to enter
numbers by using the Hardware Keypad.
Install this holder to use an external keyboard.
Supports functions such as Copy Guard to prevent unauthorized
copying.
This unit is required to install FAX Kit FK-508.
This option can be used in North America.
Used to add telephone lines.
Fax Mount Kit MK-728 is required to install FAX Kit FK-508.
This option can be used in North America.
Used to print on banner paper.
Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4) size paper.
Allows you to load up to 2500 sheets of SRA3 or 11 e 17 (A3) size
paper.
Used to place this machine on the floor.
Can load up to 2500 sheets of 8-1/2 e 11 (A4) size paper.
Can load up to 500 sheets respectively into the top and bottom
trays.
Can load up to 500 sheets into the top tray. (The bottom tray is a
storage box.)
Used to place this machine on the floor.
Used to add the bind/fold function to the Finisher FS-534.
Sorts, groups, or staples output sheets as required.
Used to add the punch function to the Finisher FS-534.
Used to add the bind/fold function to the Finisher FS-535 (only for
bizhub 554e).
Sorts, groups, or staples output sheets as required (only for bizhub
554e).
Used to add the punch function to the Finisher FS-535 (only for bi-
zhub 554e).
Adds the Z-fold or punch function to the Finisher FS-535 (only for
bizhub 554e).
Feeds out printed sheets (only for bizhub 554e).
Inserts a cover sheet into copied or printed sheets (only for bizhub
554e).
Collects printed pages.
Sorts, groups, or staples output sheets as required. This unit can be
installed in this machine.
Used to add the punch function to the Finisher FS-533.
Used to separate output sheets into two trays in the body of the ma-
chine.
2
2-7