Q3. Can I Check The Finish Before Starting Copying; How To Set: Checking The Finish With A Preview Image - Konica Minolta bizhub 554e Quick Start Manual

5
5.4.3

Q3. Can I check the finish before starting copying?

A3. Yes, you can check the finish by outputting a proof copy.
You check either by referring to a preview image or by outputting just one copy for checking how it is actually
finished.
Using a proof copy helps preventing copy errors.

How to set: Checking the finish with a preview image

1
Load the original.
2
Tap [Copy].
3
Specify copy settings and the number of copies as necessary, then tap [Preview].
4
Tap [Preview on Screen], select the original loading direction, then tap [Start].
5
Tap [View Page].
The screen used to change the preview display appears.
% To continue scanning originals, load the original, then tap [Start Scan].
% To start copying, tap [Print] or press the Start key.
% If a multi-page original has been scanned, you can flick the preview image to feed pages forward or
backward.
6
Check the preview display, and rotate the image or change settings as needed.
% To continue scanning originals, load the original, then tap [Start Scan].
% To enlarge the preview image, double-tap the image.
% To enlarge or reduce the preview image, pinch-in or pinch-out the image.
5-34
Copy
bizhub 554e/454e/364e/284e/224e
5.4