Software Version Up; Software Version Of This Unit Is Earlier Than; Restore Factory Set All; Restore System Data - Sony BVM-L230 Service Manual

1-12-1. Software Version Up

- Software version of this unit is earlier than Ver. 1.3
This is the menu to perform the software version upgrade.
Refer to "1-8. Version Upgrade".
In the software version 1.3 or later of this unit, the software and kernel version upgrade menus are moved
as follows.
. System Configuration → Monitor Upgrade → Software Upgrade or Kernel Upgrade
. Controller → Controller Upgrade → Software Upgrade or Kernel Upgrade
For version upgrade, refer to the Operation Manual; "Operation" → "Upgrading Monitor and Controller".

1-12-2. Restore Factory Set All

This is the menu to return all data (adjustment data and setting data) to the factory setting. After perform-
ing this, the Select Area menu is displayed. Refer to "Setup and preparation" → "Setting" → "Select
region" in operation manual.
Procedure
1. Select Restore Factory Set All in the menu.
The following message is displayed.
All data will be restored
and monitor will restart.
Are you sure?
OK: When returning all data (adjustment data and setting data) to the factory setting, press the
[ENTER] (Ent) button. The window disappears and the system is restarted.
Cancel: When not returning all data (adjustment data and setting data) to the factory setting, press
the [MENU] button.

1-12-3. Restore System Data

The system data (adjustment data and setting data) of this unit can be stored and loaded.
. Back Up System Data: The system data is stored in Memory Stick.
A filename having the serial number of this unit is automatically given to the stored file.
. Load System Data: Load the system data from Memory Stick to this unit.
. Delete System Data: Delete the system data file in Memory Stick.
BVM-L230
1-59