Version Upgrade; Required Equipment; About Memory Stick - Sony BVM-L230 Service Manual

1-8. Version Upgrade

In the BVM-L series, the version upgrade using Memory Stick can be performed. However, as for the
software version upgrade, it is supported in Ver. 1.11 or later, as for the FPGA data and the controller
kernel version upgrade, it is supported in Ver. 1.2 or later, and as for the kernel version upgrade of this
unit, it is supported in Ver. 1.3 or later.
In the software version 1.3 or later of this unit, the version upgrade menu is moved as follows.
. System Configuration → Monitor Upgrade
. Controller → Controller Upgrade
As for the upgrade of Ver. 1.3 or later, refer to the operation manual; "Operation" → "Upgrading Monitor
and Controller".

1-8-1. Required Equipment

. BVM-L230, control unit (referred to as controller hereafter) (At lease 1 unit each)
. Version upgrade file
. Memory Stick (in which version upgrade file is stored)
n
Be sure to use "Memory Stick Pro" for the version upgrade. If not, the version upgrade may not be
performed.

1-8-2. About Memory Stick

The Memory Stick for version upgrade has a specific directory structure for the version upgrade.
The directory structure of the version upgrade Memory Stick is as follows.
Earlier than Ver. 1.3
/MSSONY-/MONITOR-/BVM_L-/UPDATES
BVM-L230
/SOFT /BKM_16R
/BVM_L230
/KERNEL /BKM_16R
/FPGA /BVM_L230
/bin
/data.com
CONTENTS
/check_data
check_hash.bat
/bin
/data.com
CONTENTS
/check_data
check_hash.bat
vxWorks_rom.bin
version
/check_data
check_hash_kernel.bat
/bin fpga.rbf
CONTENTS version
/check_data
check_hash_fpga.bat
1-31