Sony BVM-L230 Service Manual page 23

In the case that the tilt unit is attached
Place the cover over the tilt unit.
In the case that the tilt unit is removed
Attach the front portion of the cover, then attach the rear
portion while recurving it.
BVM-L230
Tilt unit
B3 x 8
Cover (lower) (left)
B3 x 8
B3 x 8
Cover (lower) (left)
B3 x 8
10. Connect the connector of the connecting cable to the
DC 5V OUT terminal and LAN (10/100) terminal on
the monitor side.
Insert the convex
connector.
n
When connecting the cable to the DC 5V OUT terminal,
check the concave side and convex side of both ends of the
cable, and be sure to connect the convex side to the
monitor. When connecting, insert the cable so that the
shape of its end matches with the shape of the DC 5V OUT
terminal.
DC 5 V OUT terminal
LAN (10/100) terminal
1-17