Attaching Bkm-37H - Sony BVM-L230 Service Manual

1-5. Attaching BKM-37H

The monitor can be attached to the control unit (referred to
as controller hereafter) using BKM-37H.
1. Remove the four screws, then remove the feet.
PS4 x 6
Bottom surface
Feet
Controller
2. Attach the stand assembly (R) and stand assembly (L)
with the four supplied screws.
Stand assembly (R)
PSW4 x 8
Bottom surface
Controller
BVM-L230
PS4 x 6
Feet
Stand assembly (L)
3. Connect the supplied connecting cable to the DC 5V/
12V IN terminal and LAN (10/100) terminal on the
rear of the controller.
n
When connecting the cable to the DC 5V/12V IN
terminal, check the concave side and convex side of
both ends of the cable, and be sure to connect the
concave side to the controller. When connecting, insert
the cable so that the shape of its end matches with the
shape of the DC 5V/12V IN terminal.
Insert the concave
connector.
4. Attach the rear stay assembly with the four supplied
screws.
B4 x 8
Rear stay assembly
B4 x 8
1-15