Procedure When Replacing The Lcd Unit; Cd-R Directory; Data Transfer Procedure - Sony BVM-L230 Service Manual

1-6. Procedure when Replacing the LCD
Unit
When replacing the LCD unit, it is required to update the
adjustment data file written in the B board. The adjustment
data file to be updated is stored in CD-R supplied with the
LCD unit (for servicing). The update is performed by the
data transfer via LAN port.

1-6-1. CD-R Directory

A1364355A/B
(LCD unit SerialNo.)

1-6-2. Data Transfer Procedure

Required equipment
. Personal computer (PC)
(equipped with LAN port)
. LAN cable (cross)
. CD-R (supplied with LCD unit)
. FTP client software
n
The window of FFFTP (free software) is used for the
window of FTP client software.
Connection
LAN cable (cross)
PC
1-18
B_Board
9 files or
26 files
NETWORK SW:
PEER TO PEER
BVM-L230
Data transfer procedure
1. Set the BVM-L230 network switch to PEER TO PEER
side.
2. Set the PC as follows.
. IP address:
192.168.0.10
. Subnet mask: 255.255.255.0
3. Start FTP client software on the PC.
4. Select "New host", and then set the connection
destination (transfer destination) as shown below.
Basic tab
OK
. Profile Name:
. Host Name/Address: 192.168.0.1
. Username:
. Password/Phrase:
. Anonymous:
. Initial Host Folder:
n
(*1)
For the user name and password, contact your local
Sony Sales Office/Server Center.
Cancel Help
BVM-L230 (arbitrary)
(*1)
(*1)
Do not place a checkmark.
/flb0
BVM-L230