B Board Data Update - Sony BVM-L230 Service Manual

1-7-2. B Board Data Update

1. Preparation of serial number file
(1) Create the ID file for the serial number of this unit.
Create the text file having the file name
"serialnumber.id" using a tool such as notepad
"notepad.exe" supplied with Windows by typing the
serial number (by one-byte characters) attached on the
model nameplate of the removed B board.
File name: serialnumber.id (extension "id")
(2) After creating the file, save it in the same folder as the
obtained adjustment data files (9 files or 26 files).
2. Data update
(1) Turn off the power of this unit.
(2) Connect PC with this unit using the LAN cross cable.
(3) Set the NETWORK switch of this unit to PEER TO
PEER position.
(4) Set the IP address of PC as follows.
IP address: 192.168.0.10
Subnet mask: 255.255.255.0
Default gateway: None
(5) Turn on the power of this unit.
(6) Start FFFTP.
(7) Select the setting of host as follows.
Basic tab
. Profile Name:
. Host Name/Address: 192.168.0.1
. Username:
. Password/Phrase:
. Anonymous:
. Initial Local Folder: Specifies the folder in which
. Initial Host Folder:
n
(*1)
For the Username and Password/Phrase, contact your
local Sony Sales Office/Server Center.
BVM-L230
BVM-L230 (arbitrary)
(*1)
(*1)
Do not check this box.
the adjustment data file and
serial number file are stored.
/flb0
Example) Serial No. 2000001
OK Cancel Help
1-25