Table of Contents
Advertisement
Functions Supported in Software Version 1.3
Menu
User LUT
(in the Color Gamut menu of the Display Setting
menu)
Aspect Correction
(in the Native Scan Mode menu of the Display
Setting menu)
Peak White Control
(in the Display Setting menu)
• Black Detail Setting
(in the Display Function menu)
• Black Detail Mode
(in the Function Switch menu of the Display
Function menu)
Monitor Upgrade
(in the System Configuration menu)
Controller Upgrade
(in the Controller menu)
Supported function
The user LUT data are applied as the setting of the color
gamut (color space and gamma).
An SD signal of non-square pixels (the number of H
pixels of the signal system is 720 or 1440) or a 640 ×
480 SD signal of DVI video is displayed correctly by
scaling processing of doubling for the V direction and
correct aspect ratio for the H direction, and the picture is
also optimized and displayed by modifying the aperture
coefficient value, filter coefficient value, etc.
The signal gain is controlled automatically according to
the setting value for brightness, to prevent clipping.
The display mode to reduce to dull black color by
backlight leaking and assess any parts with low color
gradation precisely (black detail mode display)
The monitor is upgraded.
The controller is upgraded.
Reference page
57
59, 108
59
11, 65, 69, 90
75
83
Functions Supported in Software Version 1.3
9
Advertisement
Table of Contents
