Functions Supported In Software Version; And 1.2 - Sony BVM-F250 Operation Manual

Functions Supported in Software Version 1.1 and 1.2
The following new functions are supported for Version 1.1 and Version 1.2 of the BVM-F250/F170.
Software Version 1.1
Menu
1)
• Auto
(in the Color Temp Adj menu of the Adjustment
menu)
2)
• Copy From
(in the Picture Adj menu of the Adjustment menu)
(in the Color Temp Adj menu of the Adjustment
menu)
(in the Channel Configuration menu)
(in the Marker Setting menu of the Function Setting
menu)
(in the File Management menu)
• DisplayPort
(in the Format menu of the Channel Configuration
menu)
(in the RGB Range menu of the Channel
Configuration menu)
• HDMI/DisplayPort Auto
(in the Matrix menu of the Channel Configuration
menu)
(in the RGB Range menu of the Channel
Configuration menu)
• HDMI/DP Status
(in the System Status menu)
• Over Range
(in the On Screen Set menu of the System
Configuration menu)
2)
• Save To
(in the File Management menu)
2)
• Delete
(in the File Management menu)
1) This function is equipped with BVM-F170 only.
2) Use the controller with software version 1.6 or higher to use this function.
Software Version 1.2
Menu
• ECO lamp
• DisplayPort Upgrade
(in the Monitor Upgrade menu of the System
Configuration menu)
• ENTER button on the controller
3) Use the controller with software version 1.7 or higher to use this function.
Supported function
Automatic color temperature adjustment can be
performed using the built-in color sensor.
Data in this monitor, in another monitor or in a "Memory
Stick" can be copied.
The settings for the DisplayPort signal are available.
Matrix switching (Matrix) and quantization range setting
(RGB Range) for the HDMI or DisplayPort signal are
available.
The information of the HDMI and DisplayPort signals
can be displayed.
The zebra pattern can be displayed on the portion of
image that exceeds the allowable range of the internal
signal processing circuit.
Stores the system data to a "Memory Stick".
Deletes a file in the "Memory Stick".
Supported function
Indicates the power consumption status of the monitor
by the color of the lamp.
DisplayPort data can be upgraded.
3)
The functions assigned to the function buttons on the
controller can be displayed collectively.
Reference page
54
52, 54, 62, 66, 79
57, 61
59, 61
82
76
79
80
Reference page
16, 20
78, 103
41, 102
Functions Supported in Software Version 1.1 and 1.2
9