Button; Upgrading The Monitor And Controller; Saving The Upgrade Data In A "Memory Stick; Pro - Sony BVM-F170 Operation Manual

Assigning a Function to a
Function Button
You can assign a function other than the factory preset on
the function button of the controller.
1
Select the Function Key menu in the Controller menu.
2
Select F1 to F16 button, and then the function assigned
on each button.
Assignable functions
Scan Mode, Native Scan, 16:9, H Delay, V Delay, External
Sync, Comb, Char Off, Color Temp, Status, Aperture,
Mono, Blue Only, R Off, G Off, B Off, Chroma Up,
Interlace, Pixel Zoom, Capture Load, Marker, Aspect
Marker, Area Marker 1, Area Marker 2, Center Marker,
Aspect Marker-Line, Aspect Blanking-Half, Aspect
Blanking-Black, Side by Side, Wipe, Butterfly, Blending,
Error Notify Clear, Audio Level Meter, ALM Hold Reset,
Time Code, Difference, Checkerboard, L/R Switch,
Horopter Check, Flip H, Black Frame Insertion, Black
Detail Mode, Degauss
For details on the assigned function, see "Function Key"
(page 72) in the Controller menu.
90
Assigning a Function to a Function Button / Upgrading the Monitor and Controller
Upgrading the Monitor
and Controller
You can upgrade the monitor and the controller with the
data saved in a "Memory Stick".
You can upgrade the following data:
Monitor: Software program
Kernel
FPGA data
Controller: Software program
Kernel
Notes
• Use the controller with software version 1.6 or higher to
upgrade the monitor.
• Upgrading of the software for the controller is available
for version 1.11 or later of the software for the controller,
and upgrading of the controller kernel is available for
version 1.2 or later.
• Use a "Memory Stick PRO" for upgrading.
If a "Memory Stick" other than "Memory Stick PRO" is
used, the upgrading may not be executed correctly.
• To initialize the "Memory Stick PRO", use a machine
and application corresponding to "Memory Stick PRO".
If Windows Explorer is used for initialization, the
upgrading may not be executed correctly.
• When the unit is upgraded, use the AC power supply for
the monitor.
To get the upgrade data
Contact your Sony representative.
Saving the Upgrade Data in a
"Memory Stick PRO"
Save the upgrade data (MSSONY folder) in a "Memory
Stick PRO".
Save the whole MSSONY folder directly in the root
directory of the Memory Stick drive.
To confirm saving the data correctly
Double-click on the file including checksum.bat in the file
name.
• MSSONY/MONITOR/BVM_F/UPDATES/SOFT/BVM
_F170/checksum_soft.bat
• MSSONY/MONITOR/BVM_F/UPDATES/KERNEL/B
VM_F170/checksum_kernel.bat
• MSSONY/MONITOR/BVM_F/UPDATES/FPGA/BV
M_F170/checksum_fpga.bat
• MSSONY/MONITOR/BVM_L/UPDATES/SOFT/BKM
_16R/checksum_soft.bat