InFocus LP500 Service Manual page 117

Part Number
340-0822-xx
340-0824-xx
340-0837-xx
340-0851-xx
340-0876-xx
340-0886-xx
340-0888-xx
505-0835-xx
505-0836-xx
505-0837-xx
505-0839-xx
505-0840-xx
505-0841-xx
505-0842-xx
505-0858-xx
505-0878-xx
505-0919-xx
505-0959-xx
505-0961-xx
505-1180-xx
505-1181-xx
510-1520-xx
510-1530-xx
510-1532-xx
510-1579-xx
526-0078-xx
LP500 Series Service Manual
Part Name Projector
Elevator lever Both
Leveling foot shaft Both
Engine mount Both
spacer
IR lens, rear Both
Light block louver Both
IR lens, top Both
Speaker bracket Both
Top case Both
Bottom case Both
Rear bezel Both
Zoom ring Both
Focus ring Both
Lens cap Both
Lamp door Both
Lamp housing Both
Elevator shaft Both
Leveling foot Both
Front bezel Both
Front bezel vent Both
Optical engine LP530
Optical engine LP500
IR receiver ECA Both
Controller ECA Both
Power supply Both
Controller ECA Both
Lamp blower Both
Notes
Snaps into rear bezel.
Prevents light leakage in louver near
elevator button. Fits on the inside of the
bottom case.
Snaps into top case.
Includes leveling foot, rubber foot,
elevator, light block louver and engine
mount spacer.
Also called I/O panel cover. Also requires
rear bezel label (020-1137-xx)
Does not include the safety switch
assembly, lamp fan, or lamp blower.
Requires lamp blower gasket (329-0299-
xx), lamp blower heat shield (329-0337-
xx), and PSA square (329-0251-xx). Also
included with new optical engine.
117