InFocus LP500 Service Manual page 114

Part Name
IR receiver ECA
Keypad
Label, certification
Label, certification
Label, InFocus
nameplate
Label, rear bezel
Lamp blower
Lamp blower gasket
Lamp blower heat
shield
Lamp door
Lamp fan
Lamp fan heat shield
Lamp housing
Lamp module
Lens cap
Leveling foot
Leveling foot shaft
Light block louver
Optical engine
Optical engine
Power supply
Power supply fan
Power supply fuse
Power supply insulator
PSA square
LP500 Series Service Manual
Projector Part Number
Both 510-1520-xx
Both 526-0088-xx
LP500 020-1136-xx
LP530 020-1102-xx
Both 020-1112-xx
Both 020-1137-xx
Both 526-0078-xx
Both 329-0299-xx
Both 329-0337-xx
Both 505-0842-xx
Both 526-0079-xx
Both 329-0306-xx
Both 505-0858-xx
Both SP-Lamp-LP5E Note that lamps no longer carry a 9-digit part
Both 505-0841-xx
Both 505-0919-xx
Both 340-0824-xx
Both 340-0876-xx
LP530 505-1180-xx
LP500 505-1181-xx
Both 510-1532-xx
Both 526-0098-xx
Both 749-0026-xx
Both 329-0268-xx
Both 329-0251-xx
Notes
Requires lamp blower gasket (329-0299-xx), lamp
blower heat shield (329-0337-xx), and PSA
square (329-0251-xx). Also included with new
optical engine.
Required for new lamp blower.
Requires a lamp fan heat shield (329-0306-xx).
Also included with new optical engine.
Required for new lamp fan.
Does not include the safety switch assembly,
lamp fan, or lamp blower.
number. They now carry the 9-character
Marketing Item Code (MIC).
Prevents light leakage in louver near elevator
button. Fits on the inside of the bottom case.
Also comes with new power supply.
Fits between the power supply and chassis.
Required for new lamp blower
114