Parts Lists; Frus By Alphabetic Listing - InFocus LP500 Service Manual

Parts Lists

FRUs by alphabetic listing

Below is an alphabetically arranged list of FRUs used in the LP500 and LP530 projectors. You can also
view FRUs by numeric listing (see page 116).
Part Name
Bottom case
Chassis
Controller ECA
Controller ECA
Controller/power supply
cable
Diode heat sink bracket Both
Elevator lever
Elevator shaft
Elevator spring
Engine mount spacer
Fastener Kit
Focus ring
Front bezel
Front bezel vent
Gap pad, rear diode
Gap pad, front diode
Ground clip
I/O EMI shield
IR cable
IR lens, rear
IR lens, top
LP500 Series Service Manual
Projector Part Number
Both 505-0836-xx
Both 330-0702-xx
LP500 510-1579-xx
LP530 510-1530-xx
Both 211-0161-xx
330-0742-xx
Both 340-0822-xx
Both 505-0878-xx
Both 321-0170-xx
Both 340-0837-xx
Both 802-0027-xx
Both 505-0840-xx
Both 505-0959-xx
Both 505-0961-xx
Both 329-0301-xx
Both 329-0302-xx
Both 330-0724-xx
Both 330-0703-xx
Both 526-0094-xx
Both 340-0851-xx
Both 340-0886-xx
Notes
Includes leveling foot, rubber foot, elevator, light
block louver and engine mount spacer.
Also requires gap pad (329-0301-xx). Fits
between the chassis and the bottom of the power
supply.
Includes all fasteners necessary to attach each
FRU in the LP500/530 projector.
Adheres to diode heat sink bracket
Adheres to the chassis
Fastens to the chassis. Grounds to the optical
engine.
Snaps into rear bezel.
Snaps into top case.
113