Removing A Hard-Drive Adapter From A Hard-Drive Carrier; Removing A Hard Drive From A Hard-Drive Carrier - Dell PowerEdge R430 Owner's Manual
Hide thumbs
Also See for PowerEdge R430:
- Owner's manual (212 pages) ,
- Getting started (2 pages) ,
- Owner's manual (188 pages)
Table of Contents
Advertisement
Figure 25. Removing and installing a hard-drive adapter into a 3.5 inch hard-drive carrier
1.
3.5 inch hard-drive carrier
3.
hard-drive adapter
Removing a hard-drive adapter from a hard-drive carrier
Prerequisites
1.
Ensure that you read the
2.
Keep the #2 Phillips screwdriver ready.
Steps
1.
Remove the screws from the slide rails on the hard-drive carrier.
2.
Lift the hard-drive adapter out of the hard-drive carrier.
Removing a hard drive from a hard-drive carrier
Prerequisites
1.
Keep the #2 Phillips screwdriver ready.
2.
Remove the hard-drive carrier from the system.
Steps
1.
Remove the screws from the slide rails on the hard-drive carrier.
2.
Lift the hard drive out of the hard-drive carrier.
74
Safety
instructions.
2.
screw (5)
4.
2.5 inch hard drive
Advertisement
Table of Contents
Troubleshooting
