Installing The System Cover; Inside The System - Dell PowerEdge R430 Owner's Manual

Installing the system cover

Prerequisites
Ensure that you read the
Steps
1. Align the slots of the system cover with the tabs on the chassis.
2. Press the cover release latch, and push the cover toward the front of the chassis until the latch locks
into place.
3. Turn the cover latch release lock clockwise to the locked position.
Next steps
1. Install the bezel (optional).
2. Follow the procedure listed in
Related Tasks
Installing the optional front bezel

Inside the system

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Safety instructions.
After working inside your system.
53