Installing The Control Panel - Dell PowerEdge R430 Owner's Manual

Figure 53. Removing and installing the control panel—ten 2.5 inch hard-drives/SSDs chassis
1. screw
3. cable securing clip
5. J_FP_USB connector cable
Next steps
1. Replace the control panel.
2. Follow the procedure listed in
Related Tasks

Installing the control panel

Installing the control panel
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
120
After working inside your
2. control panel release latch
4. control panel cable connecting to the
system board
6. control panel
system.