Features - NetComm NP3024 User Manual

Features

■
Depending on your model, either 16 or 24×10/100/1000Mbps Auto-negotiation Gigabit Ethernet
ports
■
All RJ45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-
link port
■
Full/half duplex transfer mode for 10/100Mbps port
■
Full duplex transfer mode for Gigabit port
■
Wire speed reception and transmission
■
Store-and-Forward switching scheme capability to support rate adaptation and ensure data
integrity
■
Up to 4K unicast addresses entities per device, self-learning, and table aging
■
272KBytes packet buffer
■
Supports IEEE 802.3x flow control for full-duplex mode ports
■
Supports port-base VLAN
■
Supports port-base QoS
■
Supports Trunking
■
Supports Port-mirroring
■
Supports Port-setting for Speed/Disable, Flow control
■
Easy configuration via WEB Browser
■
Easy setting via Web Management Utility
■
Standard 19" Rack-mount size
YML711 Rev1
www.netcomm.com.au
NetComm 16 or 24 port Gigabit Switch
7