Table of Contents
Advertisement
Mirror Setting
Port Mirroring is a method of monitoring network traffic. Port Mirroring forwards a copy of each
incoming and/or outgoing packet from one port of a network switch to another port where the
packet can be studied. It enables the manager to keep close track of switch performance and alter it if
necessary.
Configure port mirroring by assigning a source port from which to copy all packets and a sniffer port
where those packets will be sent.
The selection of the sniffer mode is as follow:
RX (receive) mode: this mode will duplicate the data that send to the source and forward to the
sniffer port.
Figure 22. Mirror Setting
Maintenance Menu
The Maintenance Menu provides you with the tools you need to ensure that your Network runs
smoothly and to control the data traffic.
Device Status
Click on "Status" to display the device status. The screen will show the System Status, Port Status,
VLAN Status, Trunk Status and Mirror Status..
Press "Refresh" when you need to renew the posted information.
NetComm 16 or 24 port Gigabit Switch
YML711 Rev1
28
www.netcomm.com.au
Advertisement
Table of Contents
