NP2500 Power Over Ethernet Switch
24x10/100Mbps + 2 Gigabit Port Ethernet Web-Smart Switch
Key Features
24x10/100Mbps + 2 Gigabit Ports with Auto negotiation fast ethernet RJ45
ports with 24 port PoE function (port 1-24)
Compliant with 802.3af specification
Supports PoE power up to 15.4W for PoE ports
Supports PoE power maximum up to 170watts for all PoE ports (port 1 - 24)
Supports PoE Powered Device (PD) classification identity
Supports manual setting for PoE port power limitation
Each port supports auto MDI/MDIX, so there is no need to use cross-over
cables or an up-link port
Full/half duplex transfer mode for each port
Wire speed reception and transmission
Store-and-forward switching scheme capability to support rate adaptation
and ensure data integrity
Up to 4K unicast addresses entities per device, self-learning, and table aging
768KBytes packet buffer
TECHNICAL SPECIFICATIONS
Standard
•
IEEE 802.3 10BASE-T
•
IEEE 802.3u 100BASE-TX
•
IEEE 802.3ab 1000BASE-T
•
IEEE 802.3af
Network Media
•
10BASE-T Ethernet: 2 pair UTP Cat. 3,4,5, Unshielded
Twisted Pair (UTP) Cable
•
100BASE-TX Fast Ethernet: 2 pair UTP Cat. 5, Unshielded
Twisted Pair (UTP) Cable
•
1000BASE-T Fast Ethernet: 4 pair UTP Cat. 5, Unshielded
Twisted Pair (UTP) Cable
•
PoE port: 2 pair UTP Cat. 5, Unshielded Twisted Pair
(UTP) Cable
Protocol
•
CSMA/CD
Topology
•
Star
Number of Ports
•
2 x 10/100/1000Mbps Auto-MDIX Gigabit Ethernet ports
(port 25 ~ port 26)
•
24 x 10/100Mbps Auto-negotiation, Auto-MDIX PoE ports
(port 1 ~ port 24)
Your NetComm dealer:
Supports IEEE 802.3x flow control for full-duplex mode ports
Supports Back-pressure flow control for half-duplex mode ports
Supports port based VLAN
Supports port based Trunking
Supports Port-mirroring
Supports Port-setting for Speed/Disable, Flow control, QoS
Easy configuration via WEB Browser
Easy setting via Web Management Utility
Standard 19" Rack-mount size
Network Data Transfer Rate
•
Ethernet:
10Mbps
(Half-duplex)
20Mbps
(Full-duplex)
•
Fast Ethernet:
100Mbps
(Half-duplex)
200Mbps
(Full-duplex)
•
Fast Ethernet:
2000Mbps
(Full-duplex)
PoE (Power over Ethernet)
•
Up to 15.4W for PoE port
•
Maximum 170W for all PoE ports
•
PD classification identify
•
Manual setting for PoE power limitation
•
Supports PoE Priority setting
•
PoE Over Current Protection
•
PoE Circuit sorting protection
•
PoE Power on RJ-45 pin 3,6 for Power+ and pin 1,2 for Power
Data RAM Buffers
•
768K Bytes per device
Filtering Address Table
•
4K entries per device
Diagnostic LEDs
•
Per Unit : Power, System ( 2 LEDs )
•
Per port : TX: Link/Activity, Speed ( 2 LEDs )
•
PoE : PoE Status (port 1 ~ port 24) (bi-color LED)
NETCOMM LIMITED
ABN 85 002 490 486
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Power
•
100 - 240VAC 50/60Hz, Internal Universal Switching
Power
Power Consumption
•
9 watts. (max. no PD device connected)
•
180 watts (max. for up to 11 PoE Device connected)
Dimensions (W x H x D)
•
440 x 310 x 44 mm
Temperature
•
Operating: 0 ~ 40 oC
•
Storage: -10 ~ 70 oC
Humidity
•
Operating: 10% ~ 90% RH
•
Storage: 5% ~ 90% RH
Emission
•
FCC Class A
•
CE mark Class A
•
VCCI-A
Safety
•
cUL (UL 60950)
•
CB(IEC 60950)
PO Box 1200, Lane Cove NSW 2066 Australia