Trap Setting
The Trap Setting enables the device to monitor events through the Web Management Utility, and to
set the Trap IP Address where the trap event information is to be sent.
System Events :
Device Bootup :
Illegal Login
:
Twisted Pair Port Events:
Abnormal* Receive Error:
Abnormal* Transmit Error:
* Abnormal is a 50 error packet count within 10 seconds.
YML711 Rev1
www.netcomm.com.au
Figure 26. Trap Setting
Monitoring the system's trap.
A trap is hit when booting up the system.
A trap is hit when a user tries to log in using an incorrect
password, and it will record the IP address where the
incorrect login occured.
Monitoring the copper port status.
A trap where there was a receive data error in the copper
port.
A trap where there was a transmit data error in the copper
port.
NetComm 16 or 24 port Gigabit Switch
31