Chapter 3: Identifying External Components; Front Panel - NetComm NP3024 User Manual

1000base-t 16 or 24 port gigabit ethernet switch

Hide thumbs Also See for NP3024:

Table of Contents

Chapter 3: Identifying External Components

This chapter describes the front panel, rear panel, and LED indicators of the Switch.

The figure below shows the front panels of the 16-Port Switch and the 24-Port Switch.

LED Indicator:

Gigabit Ethernet Ports (1~16 or 1~24):

Note:

When the port is set to "Forced Mode", the Auto MDI/MDIX feature will be

disabled.

YML711 Rev1

www.netcomm.com.au

Front panel of 16-port Gigabit Ethernet Switch

Front panel of 24-port Gigabit Ethernet Switch

Comprehensive LED indicators display the status of the

switch and the network (see the following LED Indica-

tors section).

Depending on which model you have purchased, the

Switch has 16 or 24 Gigabit twisted pair ports, supported

auto negotiable 10/100/1000Mbps and auto MDI/MDIX

crossover detection function. This supplies true "plug

and play" capability. These ports operate in half-duplex

mode for 10/100Mbps and full- duplex mode for 10/100/

1000Mbps.

NetComm 16 or 24 port Gigabit Switch

Table of Contents

Np3016