Chapter 4: Installing The Web Management Utility - NetComm NP3024 User Manual

1000base-t 16 or 24 port gigabit ethernet switch

Hide thumbs Also See for NP3024:

Table of Contents

Chapter 4: Installing the Web Management Utility

Refer to the following instructions to install the Web Management Utility and set up your Switch.

1. Insert the provided NetComm CD in the CD-ROM Drive.

2. From the Start menu on the Windows desktop, choose Run.

3. In the Run dialog box, type D:\Web Management Utility\setup.exe (where D:\ is the letter of

your CD-ROM drive) and click OK.

4. Follow the on-screen instructions to install the utility.

5. Upon completion, go to Program Files -> web_management_utility and execute the Web

Management utility. (Figure 6.)

The Web Management Utility is divided into four areas: Discovery List, Monitor List, Device Setting

and Toolbar function. Refer to the following sections for details on each area.

YML711 Rev1

www.netcomm.com.au

Figure 6. Web Management Utility

NetComm 16 or 24 port Gigabit Switch

Table of Contents

Np3016