Features
•
24×10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports PoE enabled
•
2 x 1000BASE-T Gigabit Ethernet ports
•
Compliant with 802.3af specification
•
Supports PoE power up to 15.4W for each PoE port
•
Supports PoE power maximum 170W for the device
•
Supports PoE Powered Device (PD) classification identify
•
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port
•
Full-duplex transfer mode for speed of 10Mbps, 100Mbps and 1000Mbps
•
Half- duplex transfer mode for speed of 10Mbps and 100Mbps
•
Wire speed reception and transmission
•
Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity
•
Up to 4K unicast addresses entities per device, self-learning, and table aging
•
768KBytes packet buffer
•
Supports IEEE 802.3x flow control for full-duplex mode ports
•
Supports Back-pressure flow control for half-duplex mode ports
•
Supports Port-based VLAN
•
Supports Port-based Trunking
•
Supports Port-mirroring
•
Supports Port-setting for Speed/Disable, Flow control and Port based QoS (Quality of Service)
•
Easy configuration via Web Browser
•
Easy setting via Web Management Utility
•
Standard 19" Rack-mount size
NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
YML842 Rev1
7