NetComm Wireless M2M Series - NTC-40 Series
Step One: Inserting the SIM card
Press the SIM Eject button to eject SIM card bay. Make sure the SIM card is
inserted correctly by inserting the SIM the gold side facing down on the SIM
card bay and in the direction as shown below:
Step Two: Setting up the Cellular Router
Connect the supplied antennas to the Router by screwing them onto the
antenna connectors.
Connect the power adapter to the mains and plug the output into the power
jack of the router.The green Power LED on the panel should illuminate.
NTC-40 Series Quick Start Guide
Press the SIM
Eject button
Insert
SIM card
7