NetComm NTC-40WV Quick Start Manual page 15

NetComm Wireless M2M Series - NTC-40 Series
To Connect Using a Connection Profile
The Router profiles allow you to configure the settings that the router will use
to connect to a particular network.
By default, the Router is configured to use the AutoConfig profile. This profile
should detect the correct APN and connection details in order to connect to
your 3G service.
If it does not, you will need to enter the connection details manually. To do
this, perform the following steps:
In the AutoConfig profile, select to disable "Auto Connect" and click
"Save".
Select one of the other profiles and configure it with the details
provided by your 3G service provider.
Select to enable "Auto Connect" for this profile and click "Save".
NTC-40 Series Quick Start Guide 15