1.12 Symbols
Fig. 5:
Eye hook label
Fig. 6:
Label for points used for strapping down the
machine
Fig. 7:
Noise level label
Fig. 8:
Direction arrows
Fig. 9:
Diesel
OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm
The following symbols are displayed on the machine to provide pictorial information to the
user. The information and explanations are provided to avoid misinterpretation by the user.
The symbols have been chosen to provide important information to those involved with
operating, adjusting, maintaining, and repairing this machine.
Description
Locates the lifting points for hoisting the excavator with lifting devices (slings, chains, or
cables).
Location
On either side of the stabilizer blade, and on either side of the boom near the cylinder end
of the stick hydraulic cylinder mounting.
Description
Tie down points.
Location points designated for tie down of the machine during transport to prevent
movement during transport.
Location
On either side of the stabilizer blade, and on either side of the undercarriage.
Description
Noise levels produced by the machine.
L
= sound power level
WA
Location
On the rear window of cabine.
Description
This label shows the forward driving direction.
Location
On each undercarriage at the idler end of the structure.
Description
Fill location for diesel fuel only.
Location
On the fuel tank filler neck.
Introduction
1-13