Fire Extinguisher - Wacker Neuson 50Z3 Operator's Manual

Introduction
Fig. 27: Operator's seat and fasten seat

1.13 Fire extinguisher

50 mm (1,97")
Fig. 28: Position of fire extinguisher
1-18
Description
Risk of being thrown from the machine. Operate the machine only from the operator's
seat.
Fasten seat belt when operating the machine.
Operate within stability limits of machine to avoid tipping over.
Read the Operator's Manual.
Location
On the b-pillar in the cabin.
The fire extinguisher is not supplied with the machine.
Retrofitting a fire extinguisher according to NFPA must be performed by an authorized
Wacker Neuson service center.
Location:
In the cab, on the left in driving direction behind the seat (see
Installation:
• Mount the fire extinguisher on the cab profile according to the manufacturer's instruc-
tions.
• The maximum hole diamenter is 6mm (0.24'')
• The maximum number of holes is two.
Important!
Check the fire extinguisher at regular intervals, also make sure it is safely
mounted.
Fig. 28).
OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm