Seat 2007 Cordoba Owner's Manual page 219

Fog lights
– Remove the grille, taking out the screw
pull the grille on the side of the screw and release the cover.
Safety First
Fig. 150 Fog lights
Fig. 151 Fog lights
A ⇒ fig.
150, carefully
A
Operating instructions
– Undo the two fastening screws
unplug the connector
– Turn the headlamp cover to the left a quarter turn.
– Unplug the lamp cable.
– Undo the lamp retainer spring and remove.
– Remove the lamp and fit the new lamp in the same position,
making sure it sits correctly.
– Press the retaining spring on the lamp base and clip on.
– Plug in the lamp cable.
– The assembly of the cover and the headlamp is carried out in
reverse order.
Tips and Maintenance
If and when
A ⇒ fig. 150
and when released
F
Technical Data
217